Upgraded to a wide ROLL TOP opening, the Waterproof Claw variant comes with a seam-sealed inner waterproof liner along with the external rain cover making it 100% WATERPROOF and able to withstand the heavy monsoon rains. This version builds in all the coveted features that make the Claw, our most popular bag in India and internationally. With a 72L capacity, this ALL-WEATHER TAILBAG carries enough for a 2-3 week trip (if you pack right!) and works on almost all motorcycles. Using the MOLLE loop system, you can choose to add on a 2/3 person camping tent, a sleeping bag or the POD 12L/ POD 22L expanders to organize better & separate out your stuff. The bag comes with an inner waterproof ripstop liner, an external rain cover and a detachable shoulder belt.
All motorcycles including
Royal Enfield Himalayan, Royal Enfield Bullet Classic 350, Royal Enfield TB 350, Royal Enfield Bullet Classic 500, Royal Enfield Meteor 350, Royal Enfield Interceptor 650
Main compartment with ROLL TOP opening to enhance 100% waterproofing while making it easy to compress any extra volume. The top opening is rolled down and secured with a strap + buckle closure to secure it in place.
100% waterproof inner drybag liner rated for 5000mm water pressure and seam-sealed on all stitches to withstand heavy rains
2 side pockets to carry fuel, tools, bottles, first-aid kit or other quick-access items – capacity is big enough to take a 5L jerry can
2 zipper pockets on the side flaps as additional pockets for storing rain cover & shoulder belt
1 easy-access zipper pocket on the top to keep bike papers, wallet, maps or other small/flat items etc.
1 inside mesh zipper pocket to keep memory cards or other small items
2 MOLLE webbing straps to add on whatever you need in a modular fashion – tents/ sleeping bags or increase capacity with the POD 12L and/ or POD 22L expanders
2 compression straps on top of the bag that lets you cinch down additional luggage even without bungees. The compression straps along with the roll-top design hold your gear snugly in place especially when the bag is not fully packed.
Removable mounting straps for easy movement off the bike with mesh pockets for the straps – simple to store and easy to find when needed
Original 3M Reflectosafe tape on rear and sides for added visibility in low light conditions
Bottom bumpers secured to the bottom to protect the bag fabric from abrasion when placed on the ground
External Raincover constructed from a single fabric piece for superior waterproofing with a reflective sticker for additional visibility
Materials & Durability:
Tough high-denier fabric exterior for extreme durability
Soft plush interior lining in gray color for better visibility of packed items
Triple stitch on all joints for improved strength
Foam padding on all sides for better shape retention
Tough, long-lasting plastic reinforcement on corners
Original heavy-duty YKK pullers, sliders & zipper tape for extra durability and smooth operation on all zips
Original 3MTM ScotchliteTM reflective tape for long-lasting visibility in low light conditions
Tough, tear-resistant polyester webbing used all through
Bar-tacked at all stress points for added reinforcement
Carrying & handling:
Removable shoulder strap for easy movement off the bike – with a special pocket on the side flaps for storage
2 side grab handles for adjusting the bag during mounting or removing the bag easily when unmounting
Removable mounting straps with mesh pockets for the straps – simple to store and easy to find when needed
Specially chosen mount positions for better stress distribution with higher dual side adjustment to reduce forward lean
4 Point anchoring system makes it a breeze to load and unload
One strap goes under the tail lamp to prevent the bag from sliding forward
Two straps loop through the rear footpeg stays to secure the bag in place
Simple Double-D ring mounting and does not require any additional stays/racks
IMPORTANT NOTE to adjust the webbing length as per the mounting requirements for your specific bike model
First, secure the double D-Ring and mark the webbing after 4-5 inches
Cut the rest of the extra webbing
Burn the edges of the cut part of the webbing to stop it from fraying off.
These steps are necessary to avoid the extra webbing from getting caught up in the chain.
Capacity ~72 liters
Weight 1.9 kg
Dimensions Long edge: 69 cm, Wide edge: 35 cm, Height: 41 cm
Tough, tear-resistant 1200D x 1200D outer fabric with PVC coating
300D x 300D ripstop fabric with PU coating
200D x 200D waterproof liner fabric with PU coating
150D x 150D inner lining
68D x 68D rain cover fabric
YKKTM pullers, YKKTM sliders and YKKTM zipper chain
3MTM ScotchliteTM 8906 silver fabric trim reflective tape (RA=500 cd/lux/m2)
Fittings from an ISO 9001 certified vendor
Included in the package:
Claw Roll Top Tailbag – 1 no
100% Waterproof Inner Liner – 1 no
External Raincover – 1 no
Removable Shoulder Belt – 1 no
Removable Mounting straps – 2 no
1 Year Warranty:
Viaterra offers a 1-year warranty against material or workmanship defects.
PSI offers free domestic shipping on all orders. International shipping will be levied at actuals. Domestic buyers please note that your order will be shipped within 3 working days of orders placed through registered domestic courier companies or speed post only. PSI cannot be held responsible for any delivery delays caused by the courier company. PSI only guarantees to handover the order to the courier company or postal office within 3 working days from the date of the order.
PSI isn't liable if any damage is caused to the product during transit. Customers are advised not to accept the order if the package is damaged or has been tampered with.
Your favorite gear purchased from us doesn't fit well? No problem, we are happy to exchange it for the right size.
Please note products purchased can be exchanged for size only. Product must be shipped to us within 48hrs of receiving the product and a mail must be sent to firstname.lastname@example.org regarding the same.
Please ship the product to the address mentioned in the invoice received with the product. The cost of sending the product must be borne by the customer. PSI will send the replacement free of cost. Any product is valid for exchange only under the following conditions:
1. Product must be unused.
2. All the tags and packing material must be intact.
*Please note accessories cannot be exchanged.*
Returns & Refund Policy:
Products once purchased can only be exchanged. They cannot be returned claiming for a refund. If the replacement product is not available in the requested size, customer can choose another model. Company will not make a refund under any circumstances.
We start processing the orders soon after receiving them. Hence, orders once placed cannot be cancelled.